PRODUCTS CENTER
Armenia Acrel ASCB1-MS-CE Smart Ethernet Gateway for Smart Circuit Breaker for Remote Control Power Monitor Residual Current
Category:
Product Description
Overview
ASCB1 series intelligent micro circuit breakers (hereinafter referred to as intelligent micro circuit breakers) are applied to low-voltage terminal distribution networks in industrial, commercial, civil buildings and infrastructure fields in residential buildings and similar places.
The intelligent micro circuit breaker is used with the intelligent gateway to conduct real-time monitoring of the key electrical parameters of the power line, such as voltage, current, power, temperature, leakage, energy consumption, etc., and has remote control, abnormal warning, accident trip warning alarm, electric energy metering statistics, fault positioning and other functions. This series of products can be selected from 1 pole, 2 pole, 3 pole, 4 pole.
Coding Rule

Dispaly

Function

● Real-time monitoring of voltage, current, power, electric energy, temperature, leakage current and other parameters
● With over voltage, under voltage, overload, short circuit, over current, ultra-moderate leakage and other protection functions
● Communication: RS485(Modbus-RTU)
● With local manual lever, local electric control, local lock, remote control, timing control and other control functions
● Guide rail type installation, optional pole number 1P / 2P / 3P / 4P
● Neutral line can be switch off and protected

Application

Network


Dimension

Wiring & Installation

During installation, please tighten the copper wire with the torque specified in Table 5. After installation, check the copper wire as a shaking wire, and tighten the copper wire again with the specified torque.
The above figure is only examples of intelligent micro circuit breaker installation wiring, for reference only.


Note: Each type of intelligent micro circuit breakers can be installed in any combination, one gateway can connect up to 16 intelligent micro circuit breakers.
