![[object Object]](https://omo-oss-image.thefastimg.com/portal-saas/pg2026063019375911813/cms/image/138ba837-b50d-4ff3-a73c-2e6a2379c522.jpg "[object Object]")
PRODUCTS CENTER
Niger Acrel GGF Medical Insulation Power Distribution Cabinet Medical IT System Insulation Monitoring and Fault Locating Devices for Hospitals
Category:
Product Description
Overview
Medical IT systems are mainly used in important group 2 medical places such as operating rooms, ICU/CCU intensive care units, etc. to provide safe, reliable and continuous power distribution for important equipment in these places.
The medical insulation monitoring and fault location device is developed by Acrel based on years of design experience in the power device industry and the special requirements of insulation monitoring and fault location for power distribution systems in medical group 2 locations. The product can realize real-time monitoring of IT system insulation, load and isolation transformer temperature, etc., system insulation fault circuit location and centralized monitoring of multiple systems.
Medical IT system insulation monitoring and fault location products (6-piece set) include AITR series medical isolation transformer, AIM-M300/SG medical intelligent insulation monitor, AKH-0.66P26 current transformer, AIL150-4/AIL150-8/AIL160-6 insulation fault locator, HDR-60-24 DC power supply module and AID150/200 centralized alarm and display device, etc. The products are shown in Table 1.
Dispaly
Application
Installed in Opearting Room, ICU/CCU
Solutions
Related Products
AITR series Isolation Transformers
AITR series isolation transformers are specialized in medical IT systems. The iron core is made of stacked silicon steel wafers imported from Japan with very low loss. Double insulation treatment is adopted between windings and electrostatic shielding layer is provided to reduce electromagnetic interference between windings.
A Pt100 temperature sensor is installed in the wire package for monitoring the transformer temperature. The whole is treated with vacuum dipping paint, which increases the mechanical strength and corrosion resistance. The product has very good temperature rise performance and very low noise.
AIM-M300/SG Medical Intelligent Insulation Monitor
AIM-M300/SG hospital insulation monitor adopts advanced micro-controller technology with high integration, compact size, easy installation, integrating intelligence, digitization and networking, and is suitable for insulation monitoring and fault localization of isolated power supply system in medical group 2 places, and keep electrical safety in medical locations, such as operating rooms, intensive care units and so on.
AKH-0.66P26 Current Transformer
AKH-0.66P26 current transformer is a protection type current transformer used with AIM-M300/SG insulation monitor, the maximum measurable current is 60A, the ratio is 2000:1, the CT is mounted inside the cabinet with screws fixed directly, and the secondary side is led out, which is easy to install and use.
AIL150-4/AIL150-8/AIL160-6 Insulation Fault Locators
AIL150-4/AIL150-8/AIL160-6 insulation fault locators use high sensitivity transformers with high precision signal detection circuitry to detect the signals injected into the system by the AIM-M300/SG Medical Intelligent Insulation Monitors, and to accurately locate the circuits where the insulation faults are located. The insulation fault detection device AIL150-4 Insulation Fault Locator can locate insulation faults in 4 circuits, the insulation fault location device AIL150-8 can locate insulation faults in 8 circuits, and the medical insulation monitor device AIL160-6 can locate insulation faults in 6 circuits. Insulation fault location can be used in combination with up to 24 circuits for the fault location monitor device AIL150 series and up to 48 circuits for the AIL160 series.
HDR-60-24 DC Power Supply
HDR-60-24 DC power supply can simultaneously provide DC 24V power supply for devices such as AIM-M300/SG Medical Intelligent Insulation Monitor, AIL150/160 Series Insulation Fault Locator and AID150/200 Centralized Alarm and Display device. With high power, stable voltage output and easy installation, this power supply can meet the power supply requirements of the above devices and is a recommended power supply product.
AID150/200 Centralized Alarm and Display Device
AID150/200 centralized alarm and display device adopts LCD liquid crystal display and RS485/CAN communication interface to exchange data and information with AIM-M300/SG medical intelligent insulation monitor, AID150 can monitor the data of up to 16 AIM-M300/SG insulation monitors in real time, AID200 is suitable for monitoring the data of 1 AIM-M300/SG insulation monitor.
Dimension
Wiring
Products Applications of 6-Piece set in Operating Room
Products Applications of 6-piece set in ICU/CCU
Note: The grounding bat in the isolated power supply cabinet should be connected reliably with the equipotential terminals in the field.
Newsletter
Sign up our newsletter to get update news and article about company.
