![[object Object]](https://omo-oss-image.thefastimg.com/portal-saas/pg2026063019375911813/cms/image/138ba837-b50d-4ff3-a73c-2e6a2379c522.jpg "[object Object]")
PRODUCTS CENTER
● Input circuit: 8/16/32 ● Input mode: Active wet contact (DC12V) or passive dry contact ● Bus way: Half duplex RS485 (Modbus RTU), three-core shielding wire is recommended ● Bus capacity: ≤32 ● Switch event resolution: The ability to distinguish successive displacement of multiple contacts. When the displacement interval of any two contacts is greater than 1 millisecond, The ability to differentiate units (less than 2ms) is reflected in the SOE
● The measurement of A-type after-current; ● The streamer display of current percentage; ● The setting of rated residual action current ( see in the table 2); ● The setting of non-driving time of limitation ( see in the table 2); ● Two- pair relay output(both of which can be set) *; ● Possessing the function of on-the-spot and long-distance testing and resetting
● The measurement of A-type after-current; ● The streamer display of current percentage; ● The setting of rated residual action current ( see in the table 2); ● The setting of non-driving time of limitation ( see in the table 2); ● Two- pair relay output(both of which can be set) *; ● Possessing the function of on-the-spot and long-distance testing and resetting
● The measurement of A-type after-current; ● The streamer display of current percentage; ● The setting of rated residual action current ( see in the table 2); ● The setting of non-driving time of limitation ( see in the table 2); ● Two- pair relay output(both of which can be set) *; ● Possessing the function of on-the-spot and long-distance testing and resetting
Newsletter
Sign up our newsletter to get update news and article about company.
