![[object Object]](https://omo-oss-image.thefastimg.com/portal-saas/new2023080419495759710/cms/image/138ba837-b50d-4ff3-a73c-2e6a2379c522.jpg "[object Object]")
PRODUCT CENTER
Click to see the full breakdown
×
● Measurement: kWh, U, I, P, Q, S, etc.
● Measures 2 channels of DC energy(optional)
● Measures bidirectional DC energy
● Communication: RS485(Modbus-RTU)，2 channels of RS485(optional)
● Communication protocol: Modbus-RTU, DL/T 645-2007
● Built-in Bipolar Power Source: Power Supply for Hall Effect CT (DC -12V ~ DC +12V)
● Voltage input range: DC0-1000V
● Input signal: Shunt：0-75mV；Hall sensor：0-20mA, 4-20mA, 0-5V, 0-10V and so on.
● 2DI/2DO
● Power supply: AC/DC 85-265V or DC24V(±10%) or DC48V(±10%)
● Accuracy: 1 or 0.5 (connected via shunt)(optional)
● Switch output: 2 Relay outputs, 2A/30VDC or 2A/250VAC
● Switch input: 2 dry contact inputs
● Pulse output: A second pulse output, an energy pulse output
● Display: 8 digits display U, I, P, Q, kWh and other energy consumption
● Average barrier-free working hours: ≥50000h
● Mounted: Din rail 35mm
● Standard & Certificate: CE; IEC; UL
Learn more
● Measurement: kWh, U, I, P, Q, S, etc.
● Measures 2 channels of DC energy(optional)
● Measures bidirectional DC energy
● Communication: RS485(Modbus-RTU)，2 channels of RS485(optional)
● Communication protocol: Modbus-RTU, DL/T 645-2007
● Built-in Bipolar Power Source: Power Supply for Hall Effect CT (DC -12V ~ DC +12V)
● Voltage input range: DC0-1000V
● Input signal: Shunt：0-75mV；Hall sensor：0-20mA, 4-20mA, 0-5V, 0-10V and so on.
● 2DI/2DO
● Power supply: AC/DC 85-265V or DC24V(±10%) or DC48V(±10%)
● Accuracy: 1 or 0.5 (connected via shunt)(optional)
● Switch output: 2 Relay outputs, 2A/30VDC or 2A/250VAC
● Switch input: 2 dry contact inputs
● Pulse output: A second pulse output, an energy pulse output
● Display: 8 digits display U, I, P, Q, kWh and other energy consumption
● Average barrier-free working hours: ≥50000h
● Mounted: Din rail 35mm
● Standard & Certificate: CE; IEC; UL
Learn more
● Measurement: kWh, U, I, P, Q, S, etc.
● Can supply power ±12V to hall sensor
● Measures bidirectional DC energy
● Communication: RS485(Modbus-RTU)、Half duplex、Photoelectric isolation、Modbus-RTU / DL/T645-07、 Band:1200/2400/4800/9600、Infrared：1200
● Communication protocol: Modbus-RTU, DL/T 645-07
● Built-in Bipolar Power Source: Power Supply for Hall Effect CT (DC -12V ~ DC +12V)
● Voltage input range: DC0-1000V
● Input signal: Shunt：0-75mV；Hall sensor：0-20mA, 0-5V, etc.
● 4DI/2DO
● Power supply: AC/DC 85-265V or DC20-60VDC, or 100-350VDC
● Accuracy: 0.5
● Current Range: 0-2500A(External Shunt or Hall Current Sensor, the range can be set)
● Multiple Rate: Four time zones、two time table、fourteen time points、four multiple rates. (PZ72L-DE support only)
● Historical data statistics: Last 12 months of historical electricity(multiple rate electricity). (PZ72L-DE support only)
● Display: 8 digits display U, I, P, Q, kWh and other energy consumption
● Overload: It can work at normal status at 1.2 times of full load, and can continued work 1 second at 2 times of full load.
● Mounted: Din rail 35mm
● Standard & Certificate: CE; IEC;
Learn more
● Measurement: kWh, U, I, P, Q, S, etc.
● Can supply power ±12V to hall sensor
● Measures bidirectional DC energy
● Communication: RS485(Modbus-RTU)、Half duplex、Photoelectric isolation、Modbus-RTU / DL/T645-07、 Band:1200/2400/4800/9600、Infrared：1200
● Communication protocol: Modbus-RTU, DL/T 645-07
● Built-in Bipolar Power Source: Power Supply for Hall Effect CT (DC -12V ~ DC +12V)
● Voltage input range: DC0-1000V
● Input signal: Shunt：0-75mV；Hall sensor：0-20mA, 0-5V, etc.
● 4DI/2DO
● Power supply: AC/DC 85-265V or DC20-60VDC, or 100-350VDC
● Accuracy: 0.5
● Current Range: 0-2500A(External Shunt or Hall Current Sensor, the range can be set)
● Multiple Rate: Four time zones、two time table、fourteen time points、four multiple rates. (PZ72L-DE support only)
● Historical data statistics: Last 12 months of historical electricity(multiple rate electricity). (PZ72L-DE support only)
● Display: 8 digits display U, I, P, Q, kWh and other energy consumption
● Overload: It can work at normal status at 1.2 times of full load, and can continued work 1 second at 2 times of full load.
● Mounted: Din rail 35mm
● Standard & Certificate: CE; IEC;
Learn more
● Measurement: kWh, U, I, P, Q, S, etc.
● Measures 2 channels of DC energy(optional)
● Measures bidirectional DC energy
● Communication: RS485(Modbus-RTU)，2 channels of RS485(optional)
● Communication protocol: Modbus-RTU, DL/T 645-2007
● Built-in Bipolar Power Source: Power Supply for Hall Effect CT (DC -12V ~ DC +12V)
● Voltage input range: DC0-1000V
● Input signal: Shunt：0-75mV；Hall sensor：0-20mA, 4-20mA, 0-5V, 0-10V and so on.
● 2DI/2DO
● Power supply: AC/DC 85-265V or DC24V(±10%) or DC48V(±10%)
● Accuracy: 1 or 0.5 (connected via shunt)(optional)
● Switch output: 2 Relay outputs, 2A/30VDC or 2A/250VAC
● Switch input: 2 dry contact inputs
● Pulse output: A second pulse output, an energy pulse output
● Display: 8 digits display U, I, P, Q, kWh and other energy consumption
● Average barrier-free working hours: ≥50000h
● Mounted: Din rail 35mm
● Standard & Certificate: CE; IEC; UL
Learn more
Newsletter
Sign up our newsletter to get update news and article about company.
