![[object Object]](https://omo-oss-image.thefastimg.com/portal-saas/new2023080419495759710/cms/image/138ba837-b50d-4ff3-a73c-2e6a2379c522.jpg "[object Object]")
PRODUCT CENTER
Click to see the full breakdown
×
● Real-time monitoring of voltage, current, power, electric energy, temperature, leakage current and other parameters
● With over voltage, under voltage, overload, short circuit, over current, ultra-moderate leakage and other protection functions
● Communication: RS485(Modbus-RTU)
● With local manual lever, local electric control, local lock, remote control, timing control and other control functions
● optional buckle curve type C / D type.
● Guide rail type installation, optional pole number 1P / 2P / 3P / 4P
● Monitor residual current
● Neutral line can be switch off and protected
● The rated current it can monitor is 63A
● Installation: Din rail installed
Learn more
● Real-time monitoring of voltage, current, power, electric energy, temperature, leakage current and other parameters
● With over voltage, under voltage, overload, short circuit, over current, ultra-moderate leakage and other protection functions
● Communication: RS485(Modbus-RTU)
● With local manual lever, local electric control, local lock, remote control, timing control and other control functions
● optional buckle curve type C / D type.
● Guide rail type installation, optional pole number 1P / 2P / 3P / 4P
● Monitor residual current
● Neutral line can be switch off and protected
● The rated current it can monitor is 63A
● Installation: Din rail installed
Learn more
● Real-time monitoring of voltage, current, power, electric energy, temperature, leakage current and other parameters
● With over voltage, under voltage, overload, short circuit, over current, ultra-moderate leakage and other protection functions
● Communication: RS485(Modbus-RTU)
● With local manual lever, local electric control, local lock, remote control, timing control and other control functions
● optional buckle curve type C / D type.
● Guide rail type installation, optional pole number 1P / 2P / 3P / 4P
● Monitor residual current
● Neutral line can be switch off and protected
● The rated current it can monitor is 63A
● Installation: Din rail installed
Learn more
● Real-time monitoring of voltage, current, power, electric energy, temperature, leakage current and other parameters
● With over voltage, under voltage, overload, short circuit, over current, ultra-moderate leakage and other protection functions
● Communication: RS485(Modbus-RTU)
● With local manual lever, local electric control, local lock, remote control, timing control and other control functions
● optional buckle curve type C / D type.
● Guide rail type installation, optional pole number 1P / 2P / 3P / 4P
● Monitor residual current
● Neutral line can be switch off and protected
● The rated current it can monitor is 63A
● Installation: Din rail installed
Learn more
Acrel ATRU100-K32 Tele-terminal Unit Remote Terminal Unit
● Input circuit: 8/16/32
● Input mode: Active wet contact (DC12V) or passive dry contact
● Bus way: Half duplex RS485 (Modbus RTU), three-core shielding wire is recommended
● Bus capacity: ≤32
● Switch event resolution: The ability to distinguish successive displacement of multiple contacts. When the displacement interval of any two contacts is greater than 1 millisecond,
The ability to differentiate units (less than 2ms) is reflected in the SOE
Learn more
Acrel ATRU100-K16 Tele-terminal Unit Remote Terminal Unit
● Input circuit: 8/16/32
● Input mode: Active wet contact (DC12V) or passive dry contact
● Bus way: Half duplex RS485 (Modbus RTU), three-core shielding wire is recommended
● Bus capacity: ≤32
● Switch event resolution: The ability to distinguish successive displacement of multiple contacts. When the displacement interval of any two contacts is greater than 1 millisecond,
The ability to differentiate units (less than 2ms) is reflected in the SOE
Learn more
Acrel ATRU100-KJ8 Tele-terminal Unit Remote Terminal Unit
● Input circuit: 8/16/32
● Input mode: Active wet contact (DC12V) or passive dry contact
● Bus way: Half duplex RS485 (Modbus RTU), three-core shielding wire is recommended
● Bus capacity: ≤32
● Switch event resolution: The ability to distinguish successive displacement of multiple contacts. When the displacement interval of any two contacts is greater than 1 millisecond,
The ability to differentiate units (less than 2ms) is reflected in the SOE
Learn more
Acrel ATRU-K32 Tele-terminal Unit Remote Terminal Unit
● Input circuit: 8/16/32
● Input mode: Active wet contact (DC12V) or passive dry contact
● Bus way: Half duplex RS485 (Modbus RTU), three-core shielding wire is recommended
● Bus capacity: ≤32
● Switch event resolution: The ability to distinguish successive displacement of multiple contacts. When the displacement interval of any two contacts is greater than 1 millisecond,
The ability to differentiate units (less than 2ms) is reflected in the SOE
Learn more
Acrel ATRU-K16 Tele-terminal Unit Remote Terminal Unit
● Input circuit: 8/16/32
● Input mode: Active wet contact (DC12V) or passive dry contact
● Bus way: Half duplex RS485 (Modbus RTU), three-core shielding wire is recommended
● Bus capacity: ≤32
● Switch event resolution: The ability to distinguish successive displacement of multiple contacts. When the displacement interval of any two contacts is greater than 1 millisecond,
The ability to differentiate units (less than 2ms) is reflected in the SOE
Learn more
Acrel ATRU-K8 Tele-terminal Unit Remote Terminal Unit
● Input circuit: 8/16/32
● Input mode: Active wet contact (DC12V) or passive dry contact
● Bus way: Half duplex RS485 (Modbus RTU), three-core shielding wire is recommended
● Bus capacity: ≤32
● Switch event resolution: The ability to distinguish successive displacement of multiple contacts. When the displacement interval of any two contacts is greater than 1 millisecond,
The ability to differentiate units (less than 2ms) is reflected in the SOE
Learn more
Acrel ATRU-KJ8 Tele-terminal Unit Remote Terminal Unit
● Input circuit: 8/16/32
● Input mode: Active wet contact (DC12V) or passive dry contact
● Bus way: Half duplex RS485 (Modbus RTU), three-core shielding wire is recommended
● Bus capacity: ≤32
● Switch event resolution: The ability to distinguish successive displacement of multiple contacts. When the displacement interval of any two contacts is greater than 1 millisecond,
The ability to differentiate units (less than 2ms) is reflected in the SOE
Learn more
Acrel ASJ60-LD16A Residual Current Relays to Monitor Leakage Current Measure Residual Current
● The measurement of A-type after-current;
● The streamer display of current percentage;
● The setting of rated residual action current ( see in the table 2);
● The setting of non-driving time of limitation ( see in the table 2);
● Two- pair relay output(both of which can be set) *;
● Possessing the function of on-the-spot and long-distance testing and resetting
Learn more
Acrel ASJ20-LD1A Residual Current Relays to Monitor Leakage Current Measure Residual Current
● The measurement of A-type after-current;
● The streamer display of current percentage;
● The setting of rated residual action current ( see in the table 2);
● The setting of non-driving time of limitation ( see in the table 2);
● Two- pair relay output(both of which can be set) *;
● Possessing the function of on-the-spot and long-distance testing and resetting
Learn more
Acrel ASJ10L-LD1A Residual Current Relays to Monitor Leakage Current Measure Residual Current
● The measurement of A-type after-current;
● The streamer display of current percentage;
● The setting of rated residual action current ( see in the table 2);
● The setting of non-driving time of limitation ( see in the table 2);
● Two- pair relay output(both of which can be set) *;
● Possessing the function of on-the-spot and long-distance testing and resetting
Learn more
Acrel ASJ10-LD1C Residual Current Relays to Monitor Leakage Current Measure Residual Current
● The measurement of A-type after-current;
● The streamer display of current percentage;
● The setting of rated residual action current ( see in the table 2);
● The setting of non-driving time of limitation ( see in the table 2);
● Two- pair relay output(both of which can be set) *;
● Possessing the function of on-the-spot and long-distance testing and resetting
Learn more
Acrel ASJ10-LD1A Residual Current Relays to Monitor Leakage Current Measure Residual Current
● The measurement of A-type after-current;
● The streamer display of current percentage;
● The setting of rated residual action current ( see in the table 2);
● The setting of non-driving time of limitation ( see in the table 2);
● Two- pair relay output(both of which can be set) *;
● Possessing the function of on-the-spot and long-distance testing and resetting
Learn more
● Rated secondary current: 5A
● Rated primary current: 10A-5000A
● Accuracy: 0.2, 0.5S, 0.2S
● Rated operation voltage AC 0.66kV(Equivalent AC 0.69kV,GB156-2017)
● Rated frequency 50-60Hz
● Used in place without direct rain and snow,without severe pollution and acute shock
● Standard & Certificate: CE; IEC; UL
Learn more
● Rated secondary current: 5A
● Rated primary current: 10A-5000A
● Accuracy: 0.2, 0.5S, 0.2S
● Rated operation voltage AC 0.66kV(Equivalent AC 0.69kV,GB156-2017)
● Rated frequency 50-60Hz
● Used in place without direct rain and snow,without severe pollution and acute shock
● Standard & Certificate: CE; IEC; UL
Learn more
● Rated secondary current: 5A
● Rated primary current: 10A-5000A
● Accuracy: 0.2, 0.5S, 0.2S
● Rated operation voltage AC 0.66kV(Equivalent AC 0.69kV,GB156-2017)
● Rated frequency 50-60Hz
● Used in place without direct rain and snow,without severe pollution and acute shock
● Standard & Certificate: CE; IEC; UL
Learn more
● Rated secondary current: 5A
● Rated primary current: 10A-5000A
● Accuracy: 0.2, 0.5S, 0.2S
● Rated operation voltage AC 0.66kV(Equivalent AC 0.69kV,GB156-2017)
● Rated frequency 50-60Hz
● Used in place without direct rain and snow,without severe pollution and acute shock
● Standard & Certificate: CE; IEC; UL
Learn more
● Rated secondary current: 5A
● Rated primary current: 10A-5000A
● Accuracy: 0.2, 0.5S, 0.2S
● Rated operation voltage AC 0.66kV(Equivalent AC 0.69kV,GB156-2017)
● Rated frequency 50-60Hz
● Used in place without direct rain and snow,without severe pollution and acute shock
● Standard & Certificate: CE; IEC; UL
Learn more
● Rated secondary current: 5A
● Rated primary current: 10A-5000A
● Accuracy: 0.2, 0.5S, 0.2S
● Rated operation voltage AC 0.66kV(Equivalent AC 0.69kV,GB156-2017)
● Rated frequency 50-60Hz
● Used in place without direct rain and snow,without severe pollution and acute shock
● Standard & Certificate: CE; IEC; UL
Learn more
● Rated secondary current: 5A
● Rated primary current: 10A-5000A
● Accuracy: 0.2, 0.5S, 0.2S
● Rated operation voltage AC 0.66kV(Equivalent AC 0.69kV,GB156-2017)
● Rated frequency 50-60Hz
● Used in place without direct rain and snow,without severe pollution and acute shock
● Standard & Certificate: CE; IEC; UL
Learn more
● Rated secondary current: 5A
● Rated primary current: 10A-5000A
● Accuracy: 0.2, 0.5S, 0.2S
● Rated operation voltage AC 0.66kV(Equivalent AC 0.69kV,GB156-2017)
● Rated frequency 50-60Hz
● Used in place without direct rain and snow,without severe pollution and acute shock
● Standard & Certificate: CE; IEC; UL
Learn more
Newsletter
Sign up our newsletter to get update news and article about company.
